Select default gateway

From Scalelogic Wiki
Revision as of 21:40, 7 July 2014 by migrate>Un-K (Created page with "This function allows you to set a default gateway for the storage system. Only one default gateway can be set up at any given time. *'''''NOTE:''''' The default gateway will ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This function allows you to set a default gateway for the storage system. Only one default gateway can be set up at any given time.

  • NOTE: The default gateway will become inactive if any of the following conditions are met:
    The interface with the default gateway has become part of a bonding interface,the interface with the default gateway has been removed or deactivated (concerns both physical and bonding interfaces).
  • NOTE: It is possible to set the default gateway on an inactive interface. In such a case, the gateway will remain inactive until that interface is activated.
  • NOTE: If the interface you are setting the default gateway on does not have any gateway defined (i.e. the Gateway field says Undefined), you will need to define a gateway first (under the text console, please press CTRL+ALT+N and select the interface followed by Gateway).
Retrieved from "http://wiki.scalelogicinc.com/nx/index.php?title=Select_default_gateway&oldid=644"