Edit target: Difference between revisions

Revision as of 16:01, 29 June 2014

This function allows You to modify settings or the earlier created target. You can modify :

Target Name
- Target name can contain only : a-z, 0-9. Only a special charaters . : - are allowed. The name also cannot start or end with a special character or contain special characters only.
SCSI ID
- Only 0-9 and a-f can be used. A SCSI ID name can contain also big letters. A SCSI ID has exactly 16 signs.
LUN
- A LUN name can contain 0-9, and also special characters. It is highly recommended to use only values 0-9.
ACCESS MODE
- by default the READ-WRITE access mode is set. You can change it READ ONLY access mode.

It is also possible to enable or disable authentication restrictions, like :

@@ Line 2: / Line 2: @@
 *'''Target Name'''
-**Target name can contain only : a-z, 0-9. Only a special charaters . : - are allowed. The name also cannot start or end with a special character or contain special characters only. &nbsp;
+**Target name can contain only&nbsp;: a-z, 0-9. Only a special charaters .&nbsp;: - are allowed. The name also cannot start or end with a special character or contain special characters only. &nbsp;
 *'''SCSI ID'''
 **Only 0-9 and a-f can be used. A SCSI ID name can contain also big letters. A SCSI ID has exactly 16 signs.
 *'''LUN'''
-**A LUN name can contain 0-9, small and big letters and also special characters. It is highly recommended to use only values 0-9.
+**A LUN name can contain 0-9, and also special characters. It is highly recommended to use only values 0-9.
 *'''ACCESS MODE'''
 **by default the&nbsp;'''READ-WRITE&nbsp;'''access mode is set. You can change it &nbsp;READ ONLY access mode.&nbsp;