SNMP settings

This function enables you to configure access over the SNMP protocol in versions 2 or 3.

With SNMP enabled, you receive a wealth of information (CPU usage, system load, memory info, ethernet traffic, running processes).
System location and system contact are only for your information.  For example, when you connect from an SNMP client, you will see your location and name.

SNMP, version 3 has an encrypted transmission feature as well as authentication by username and password.
SNMP, version 2 does not have encrypted transmission, and authentication is done only via the community string.

The community string you set can contain up to 20 characters, while the password needs to have at least 8 characters.

Links to SNMP clients:

http://www.muonics.com 

http://www.mg-soft.com 

http://www.manageengine.com

Note: Our storage system supports the SNMP protocol in MIB-II standard.  List of MIBs: - mib-2.host - mib-2.ip - mib-2.tcp - mib-2.udp - mib-2.interfaces - mib-2.at - system

Examples:

NET-SNMP-EXTEND-MIB::nsExtendOutputFull."compression" = STRING: Pool-0/d1 1.00

Pool-0/z1@snap1 1.00

Pool-0/.sys 1.00

Pool-0/d1@snap2 1.00

Pool-0/z1 1.00

Pool-0 1.00

NET-SNMP-EXTEND-MIB::nsExtendOutputFull."volumes_list" = STRING: NAME USED  AVAIL  RATIO

Pool-0       4.13G  15.1G  1.00x

Pool-0/d1      96K  15.1G  1.00x

Pool-0/z1      56K  15.1G  1.00x

NET-SNMP-EXTEND-MIB::nsExtendOutputFull."snapshots_list" = STRING: NAME USED  RATIO  CREATION

Pool-0/d1@snap2     0B  1.00x  Wed Oct 25 11:36 2017

Pool-0/z1@snap1     0B  1.00x  Wed Oct 25 11:36 2017

Above example lists recently created snapshots.

List of ZFS-related information you can get via SNMP using NYMNETWORKS

snmpwalk -v 2c -m NYMNETWORKS-MIB -c community 192.168.251.79 .1.3.6.1.4.1.25359.1
NYMNETWORKS-MIB::zfsFilesystemName.1 = STRING: "Pool-0"
NYMNETWORKS-MIB::zfsFilesystemName.2 = STRING: "Pool-1"
NYMNETWORKS-MIB::zfsFilesystemAvailableKB.1 = Gauge32: 15861464
NYMNETWORKS-MIB::zfsFilesystemAvailableKB.2 = Gauge32: 15861672
NYMNETWORKS-MIB::zfsFilesystemUsedKB.1 = Gauge32: 4327720
NYMNETWORKS-MIB::zfsFilesystemUsedKB.2 = Gauge32: 4327512
NYMNETWORKS-MIB::zfsPoolHealth.1 = INTEGER: online(1)
NYMNETWORKS-MIB::zfsPoolHealth.2 = INTEGER: online(1)
NYMNETWORKS-MIB::zfsFilesystemSizeKB.1 = Wrong Type (should be INTEGER): Gauge32: 20189184
NYMNETWORKS-MIB::zfsFilesystemSizeKB.2 = Wrong Type (should be INTEGER): Gauge32: 20189184
NYMNETWORKS-MIB::zfsFilesystemAvailableMB.1 = Gauge32: 15489
NYMNETWORKS-MIB::zfsFilesystemAvailableMB.2 = Gauge32: 15489
NYMNETWORKS-MIB::zfsFilesystemUsedMB.1 = Gauge32: 4226
NYMNETWORKS-MIB::zfsFilesystemUsedMB.2 = Gauge32: 4226
NYMNETWORKS-MIB::zfsFilesystemSizeMB.1 = Gauge32: 19716
NYMNETWORKS-MIB::zfsFilesystemSizeMB.2 = Gauge32: 19716
NYMNETWORKS-MIB::zfsARCSizeKB.0 = Gauge32: 61086
NYMNETWORKS-MIB::zfsARCMetadataSizeKB.0 = Gauge32: 9278
NYMNETWORKS-MIB::zfsARCDataSizeKB.0 = Gauge32: 51808
NYMNETWORKS-MIB::zfsARCHits.0 = Counter32: 229308
NYMNETWORKS-MIB::zfsARCMisses.0 = Counter32: 41260
NYMNETWORKS-MIB::zfsARCTargetSize.0 = Gauge32: 64287
NYMNETWORKS-MIB::zfsARCMru.0 = Gauge32: 59529
NYMNETWORKS-MIB::zfsL2ARCHits.0 = Counter32: 0
NYMNETWORKS-MIB::zfsL2ARCMisses.0 = Counter32: 0
NYMNETWORKS-MIB::zfsL2ARCReads.0 = Counter32: 0
NYMNETWORKS-MIB::zfsL2ARCWrites.0 = Counter32: 0